Washer Not Draining

A washer that ends the cycle with a tub of water has a drain-path problem in most cases: the pump is clogged, the pump has failed, or the hose between them is blocked or kinked. The clog is usually innocent — coins, pins, a small sock that left the drum months ago. Front-loaders catch most of it in a filter you can reach; top-loaders send it to the pump.

📞 Talk to an Appliance Repair Specialist: (983) 900-5287

Frequently Asked Questions

How much does appliance repair cost in Centennial, CO?

Most repairs run $100 to $500 by appliance. Fridges run $200 to $300 for many jobs, dishwashers $160 to $300, dryers $100 to $400, washers $150 to $450, and ovens, ranges, or cooktops $100 to $500. The full price is set in writing before work starts.

What does the diagnostic fee cover?

The visit is $89. It covers the trip, the meter testing to find the problem, and a written price for the repair. Approve the repair and the $89 is credited toward it.

Can my appliance be repaired the same day?

In most cases, yes. Common parts are parts we stock, and straightforward repairs often end at the first visit. If a part must be ordered, you hear the date before you pay.

Are repairs covered by a warranty or a home plan?

Maker warranties and home plans have their own terms. Ask us before you approve work if you plan to claim, and keep the written price and the invoice — that is what those plans ask for.

Which appliances do you service?

Fridges, washers, dryers, dishwashers, ovens, stoves and ranges, freezers, microwaves, ice makers, and cooktops — gas and electric.

Which areas do you serve?

Centennial, Greenwood Village, Lone Tree, and Englewood have pages on this site. The wider south metro is served on the same plan; see the Service Areas page.

What Does My Appliance Repair Cost?

Appliance repair is priced per job — by the part that failed, not by the hour. Here are the ranges we see on real jobs around Centennial, and a calculator built on the same numbers. The $89 service visit is credited to your repair when you go ahead.

Refrigerator & Freezer

Most refrigerator repairs land $200 to $300 — a fan motor, a defrost part, a control. The freezer circuit runs $200 to $400, and an ice maker runs $150 to $350. Sealed-system work — a compressor — is priced at the visit, never off a chart. The $89 visit fee is credited to the repair.

Washer & Dryer

A washer drain, pump, or belt repair runs $150 to $280; a motor or control runs $250 to $450. A dryer element or thermal part runs $100 to $250; a dryer motor or board runs $250 to $400. You get one price in writing before work starts.

Dishwasher

A pump, valve, or inlet repair runs $160 to $240; a motor or control runs $220 to $300. Standing water is usually a drain or pump problem — and the fix is quoted whole, parts and labor together, at the visit.

Oven, Stove & Cooktop

An igniter, element, or switch runs $150 to $300; a cooktop surface repair runs $100 to $300; a control board or gas valve runs $300 to $500. Gas work is tested for leaks before the tech leaves — every time.

Microwave

A door switch, fuse, or light repair runs $100 to $200; a magnetron or control runs $200 to $300. On an older countertop unit the honest answer is sometimes replacement — the tech will show you both numbers.

What Moves the Price

  • The part. A defrost timer and a control board cost very different amounts. Every range here is keyed to the part class — and the written quote at the visit names the exact part before work starts.
  • The $89 visit, credited. The service visit is $89 and it comes off the repair when you go ahead. If the fix is only the visit — a clogged filter, a tripped breaker — the $89 is the whole bill.
  • Brand and age. Parts for some premium brands run higher and take a day or two to land. The quote says which, before you decide.
  • Repair or replace. If a repair passes about half the cost of a comparable new appliance, the tech shows you both numbers. Sometimes the right call is a new machine — we would rather tell you that than sell a repair that will not hold.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

A note on parts. Most repairs here are figured with the part, the labor, and the credited $89 visit together. If a part has to be ordered, the quote says so up front with the day it lands — no open-ended waits, and the visit fee is never charged twice.

Estimate Your Repair

1 · Pick your appliance

A compressor or sealed-system problem is priced at the visit — never off this chart. The $89 visit is credited to the repair.

Free — no obligation. Your calculator numbers ride along with the request.

A front-load washing machine opened up with its drum and control panel exposed in Centennial, CO

How urgent is this?

A washer that cannot drain will leak or burn out its pump if you keep running loads. Bail what you can, leave the door open so it does not sour, and book. If water is on the floor now, shut the supply valves behind the machine and call today.

Likely causes, in test order

What you can check

Find the small door at the bottom front of a front-loader. Put towels and a shallow pan down — there will be water. Unscrew the filter slow, let the water out in stages, and clear what you find. Rinse the filter, seat it snug, and run a drain-and-spin. If it drains, you just did the most common washer fix in this trade for free.

What to leave alone

Do not keep running loads in a machine that cannot drain — it will leak or burn the pump out. Do not force the door if it is locked with water in the tub; bail what you can through the filter drain first, then book.

What the fix involves

If the filter was clean and the tub still holds water, the pump moves to the top of the list. A loud hum with no drain, a grind from the bottom front, or a slow drain that gives up mid-cycle all point at the pump. Write any error code down before you unplug the machine — it speeds the visit up.

The service that fits

Most washer not draining calls land on our washing machine repair page. No drain, no spin, leaks, or hard shaking. Drain path first, then drive parts, then the lock and controls. What it runs: Most repairs $150 to $450.

Need help in Centennial?

Call (983) 900-5287 or send the form. We'll tell you what the job needs and what it should cost before any work starts.

Request a repair visit

📞 (983) 900-5287